Ephedra based products The makers of Superdrine, Metabothin, Ripped Power and Super Ephedra extreme Ephedra based products purchase Ripped Power, Superdrine and Super Ephedra Extreme


Metabothin Optimal Diet and Energy  from American Generic Labs

Metabothin, or Metabo Thin, by American Generic Laboratories (AGL), is the Ephedra Diet Pill that will make your dream of a perfect body into a reality. With a proprietary blend of the strongest, all natural weight loss herbs, Ephedra products and supplements available, Metabothin Ephedra Diet Pills really delivers excellent results. 

Metabothin ephedra pills will attack your excess weight from multiple angles by:

* Boosting your metabolism
* Utilizing thermogenics that turn your body into a fat burning furnace
* Suppressing your appetite
* Utilizing both natural herbs AND the best scientifically created supplements
* Increasing your energy

 




Metabothin replaces Metabolife 356 ephedra, adding Synephrine for an even more complete solution. This means is that if you liked Metabolife Ephedra, you'll love the new Metabothin ephedra diet pill. The proprietary combination of centuries old herbs with the most technologically advanced new supplements means that you are buying the most effective weight loss ephedra product possible. Ginseng, cocoa extract, royal jelly, ginger root, and bitter orange (synephrine) have long been praised for their weight loss and energy boosting properties. Add the indisputable, widely tested metabolic powers of pure ephedra extract, and you have the most powerful over-the-counter weight loss solution available. You don't have money to waste on a fad diet pill. Metabothin uses proven methods to shed extra pounds quickly and easily.

Metabothin will help suppress your appetite, making dieting painless instead of a constant struggle. But how many times have you cheated on your diet not from hunger, but because you felt so tired and groggy that you couldn't get your day-to-day tasks done? You can't spend months feeling like a zombie. Too many people count on you. The Metabothin ephedra supplement will help you reach your weight loss goals quickly, while keeping your energy levels high. You'll feel better than ever, losing weight while remaining effective at home and in the workplace.

One-time Stacker 2 ephedra users are realizing just how powerful the Metabothin ephedra diet pill is. Through thermogenic properties, it will burn calories all day as if you were exercising. Your body will act as a metabolic furnace while you go about your normal routine, saving you time and energy, and turning your weight loss dreams into reality.

Serving Size: 1 caplet

Servings Per Container: 90

Nutrion Facts:
Vitamin E (as di-alpha tocopheryl acetate) 6 i.u. 20%
Calcium (as Calcium Carbonate) 100mg 10%
Magnesium (as Magnesium Chelate) 75mg 18%
Zinc (as Zinc Chelate) 5mg 33%
Chromium (as Chromium Piccolinate) 75mg 62%

Ingredients:
Proprietary Blend 730 mg
Ephedra Extract 10 mg (leaves), Guarana seed (Paullinia cupana) (40mg Caffeine), Acacia Rigidula Extract (leaves), Citrus aurantium (25mg synephrine), Eleutherococcus senticosus root, Lecithin, Ginger root, Sarsaparilla root, Damiana leaf, Bovine complex, Nettles leaf, Royal Jelly, Goldenseal, Spirulina, Gotu Kila, Theobroma Cocoa Extract (seed), Phenylethylamine HCL, Green Tea Extract (leaves), Yohimbe Extract (bark)

Other Ingredients: Dextrose, Microcrystalline Cellulose, Hydroxy Propyl Methylcellulose, Stearic Acid, Magnesium Stearate, Sodium Starch Glucolate, Starch, Triacetin, Titanium Dioxide, Silica

Take the first step towards reaching your weight loss goals; add Metabothin by American Generic Laboratories to your cart now!

Staff notes: Metabothin replaced Metabolife 356 with ephedraMetabolife 356, and Metabolife Ephedra. It is similar to Stacker 2 Ephedra and Stacker 3 with Ephedra. Also see: Metabo Thin, Metabothen and Metabothan. Metabothin is also well known for use within an Ephedra Diet Pian. See: Ephedra Diet Pills, Ephedra Diet Pill and Ephedra Supplements.




[W3C HTML Validator]

Errors or Warnings found while checking this document as -//W3C//DTD XHTML 1.0 Strict//EN

Result: 18 Errors
Address:http://www.metabothin.com/
Checked by:http://validator.w3.org/
Charset:utf-8
Doctype:-//W3C//DTD XHTML 1.0 Strict//EN
Go to the errors - Go to the warnings

Validation Output: 18 error(s)

Go to the top
    • Line 92, Column 45: there is no attribute "align"
    •         <div class="header-container" align="center">
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 93, Column 81: there is no attribute "bgcolor"
    • …;" border="0" cellspacing="0" cellpadding="0" bgcolor="#ffffff" align="center">
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 93, Column 97: there is no attribute "align"
    • …;" border="0" cellspacing="0" cellpadding="0" bgcolor="#ffffff" align="center">
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 96, Column 29: document type does not allow element "table" here; missing one of "th", "td" start-tag
    • <table style="width: 590px;">
    • The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.

      One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").

    • Line 98, Column 11: there is no attribute "width"
    • <td width="133px"><img src="/nick/free.jpg" alt="" border="0" /></td>
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 98, Column 59: there is no attribute "border"
    • <td width="133px"><img src="/nick/free.jpg" alt="" border="0" /></td>
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 109, Column 5: end tag for "tr" which is not finished
    • </tr>
    • Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>

      Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.

    • Line 183, Column 160: there is no attribute "target"
    • …metabothin-ephedra-90-caplets" target="_self"><img title="BUY NOW!" src="/medi…
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 205, Column 41: end tag for "ul" which is not finished
    •                                     </ul>
    • Most likely, you nested tags and closed them in the wrong order. For example <p><em>...</p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>...</em></p>

      Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.

    • Line 271, Column 8: required attribute "type" not specified
    • <script>$_SKIN_URL = 'http://www.metabothin.com/skin/frontend/default/default/'…
    • The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

      Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

    • Line 276, Column 7: required attribute "type" not specified
    • <style>
    • The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

      Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

    • Line 276, Column 7: document type does not allow element "style" here
    • <style>
    • The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

      One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

    • Line 313, Column 136: document type does not allow element "link" here
    • …n/frontend/default/default/quickcontact/css/form-contact.css" rel="stylesheet">
    • The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

      One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

    • Line 313, Column 137: end tag for "link" omitted, but OMITTAG NO was specified
    • …n/frontend/default/default/quickcontact/css/form-contact.css" rel="stylesheet">
    • You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".

    • Line 325, Column 88: there is no attribute "name"
    • …om/quickcontact/index/post/" method="post" name="contactform" id="contactform">
    • You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

      This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

      How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

    • Line 345, Column 142: end tag for "input" omitted, but OMITTAG NO was specified
    • …fault/quickcontact/images/submit.jpg"> <a href="#" class="close"><img src="htt…
    • You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".

    • Line 345, Column 267: required attribute "alt" not specified
    • …om/skin/frontend/default/default/quickcontact/images/close.jpg" /></a> </div>  
    • The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

      Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

    • Line 362, Column 122: document type does not allow element "a" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
    • …olor: #212121; text-decoration: none;"><img src="https://www.positivessl.com/i…
    • The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.

      One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").

Go to the top
SSL Certificate